I've recently bought my Siii Coupe!
Over the moon with it thus far. I'm pretty handy with a spanner so I joined here to mine your wealth of knowledge.
Might even bestow some of my own
Another newbie
Forum rules
YOU NEED TO SAY HELLO HERE TO SEE ALL OF THE SITE.
PLEASE DONT ASK QUESTIONS HERE
THIS SECTION IS ONLY TO SAY HELLO. PLEASE REMEMBER YOU ARE NOT PERMITTED TO SELL PARTS OR CARS UNTIL YOU HAVE 25 POSTS. THIS IS TO PROTECT HCOC MEMBERS.
IF YOU DO NOT SAY HELLO IMMEDIATELY YOUR ACCOUNT MAY BE DELETED
YOU NEED TO SAY HELLO HERE TO SEE ALL OF THE SITE.
PLEASE DONT ASK QUESTIONS HERE
THIS SECTION IS ONLY TO SAY HELLO. PLEASE REMEMBER YOU ARE NOT PERMITTED TO SELL PARTS OR CARS UNTIL YOU HAVE 25 POSTS. THIS IS TO PROTECT HCOC MEMBERS.
IF YOU DO NOT SAY HELLO IMMEDIATELY YOUR ACCOUNT MAY BE DELETED
-
Aikman26
- Searching in the dark
- Posts: 4
- Joined: Wed Sep 16, 2015 2:36 pm
- Real Name:
- Coupe: Siii / TSiii
- Engine: 2.0
- Has thanked: 0
- Been thanked: 0
Another newbie
Hi all;
I've recently bought my Siii Coupe!
Over the moon with it thus far. I'm pretty handy with a spanner so I joined here to mine your wealth of knowledge.
Might even bestow some of my own
I've recently bought my Siii Coupe!
Over the moon with it thus far. I'm pretty handy with a spanner so I joined here to mine your wealth of knowledge.
Might even bestow some of my own
-
Mike.Lawre
- Club manager
- Posts: 7640
- Joined: Wed Sep 12, 2012 3:22 pm
- Real Name:
- Coupe: Siii / TSiii
- Engine: 2.0
- Location: Cookley Worcs.
- +_number: 0003
- Has thanked: 31 times
- Been thanked: 160 times
Re: Another newbie
Founder member of "The Grumpy Old Men's Section"
Find me at The Rose Theatre http://rosetheatre.co.uk
Find me at The Rose Theatre http://rosetheatre.co.uk
-
Rick
- Club manager
- Posts: 9186
- Joined: Mon Feb 08, 2010 7:34 pm
- Real Name:
- Coupe: Gen3.5
- Engine: 2.0
- Location: Bristol U.K.
- +_number: 1701
- Has thanked: 23 times
- Been thanked: 206 times
Re: Another newbie
Hello and to the forum.
Plenty of great information here. Search and ye shall find
to the forum.Plenty of great information here. Search and ye shall find
-
Aikman26
- Searching in the dark
- Posts: 4
- Joined: Wed Sep 16, 2015 2:36 pm
- Real Name:
- Coupe: Siii / TSiii
- Engine: 2.0
- Has thanked: 0
- Been thanked: 0
Re: Another newbie
Thanks for the welcome guys. My first port of call is going to be tracing that damn rear end rattle. It's driving me insane 
Currently got the bootlid packed out with some sticky foam - doesnt seem to be that. Im guessing droplinks next.
- Have already checked all the obvious stuff like spare wheel tray, jack, drain tubes etc.
Currently got the bootlid packed out with some sticky foam - doesnt seem to be that. Im guessing droplinks next.- Have already checked all the obvious stuff like spare wheel tray, jack, drain tubes etc.
-
thedupleman
- Club Owner
- Posts: 16736
- Joined: Mon Feb 08, 2010 9:14 pm
- Real Name:
- Coupe: s-Coupe (1991-1996)
- Engine: 2.0
- Location: Hcoc bunker, sandbach
- +_number: 0002
- Has thanked: 41 times
- Been thanked: 154 times
- Contact:
-
Rick
- Club manager
- Posts: 9186
- Joined: Mon Feb 08, 2010 7:34 pm
- Real Name:
- Coupe: Gen3.5
- Engine: 2.0
- Location: Bristol U.K.
- +_number: 1701
- Has thanked: 23 times
- Been thanked: 206 times
Re: Another newbie
If its not the drop links try the ANTI ROLL BAR that goes from one side to the other as the rubber bushes on those go as well
These
Saw one while I was at Sharkey's the other week and the droplinks were fine but these bushes were well knackered
These
- Anti_Roll_Bar_Bush_large.jpg (6.42 KiB) Viewed 5376 times
-
ChelseaBoy
- Running around headless
- Posts: 250
- Joined: Wed Sep 02, 2015 7:44 pm
- Real Name:
- Coupe: Siii / TSiii
- Engine: 2.0
- Has thanked: 6 times
- Been thanked: 15 times
-
Xxxjayedxxx
- Learning the ropes
- Posts: 86
- Joined: Sun Jul 05, 2015 5:44 pm
- Real Name:
- Coupe: Gen3
- Engine: 2.0
- Has thanked: 3 times
- Been thanked: 1 time
-
Aikman26
- Searching in the dark
- Posts: 4
- Joined: Wed Sep 16, 2015 2:36 pm
- Real Name:
- Coupe: Siii / TSiii
- Engine: 2.0
- Has thanked: 0
- Been thanked: 0
Re: Another newbie
Thanks for the warm welcome guys 
Cheers for the advice Dodge! I might nip along to the Hyundai dealer at the weekend and see if they'll put it up on the ramps for me.
Also FYI everyone I'm a design engineer - so if you need drawings done I'll be happy to help I'm also a dab hand with a soldering iron, PCB design, 3d printing etc
Cheers for the advice Dodge! I might nip along to the Hyundai dealer at the weekend and see if they'll put it up on the ramps for me.
Also FYI everyone I'm a design engineer - so if you need drawings done I'll be happy to help I'm also a dab hand with a soldering iron, PCB design, 3d printing etc
-
Tuscani TSIII
- Getting hooked
- Posts: 667
- Joined: Tue Feb 04, 2014 11:17 am
- Real Name:
- Coupe: Siii / TSiii
- Engine: 2.0
- Has thanked: 19 times
- Been thanked: 26 times
Re: Another newbie
Welcome to the club.
I hope you are this much of a dab hand with the 3d printing
http://www.newtiburon.com/forums/exteri ... p-kit.html
I hope you are this much of a dab hand with the 3d printing
http://www.newtiburon.com/forums/exteri ... p-kit.html
-
ben.loader
- Getting hooked
- Posts: 623
- Joined: Tue Aug 04, 2015 9:50 pm
- Real Name:
- Coupe: Gen3.5
- Engine: 2.0
- Has thanked: 6 times
- Been thanked: 20 times