Page 2 of 2
Re: Gen3 v6
Posted: Thu Mar 02, 2017 10:18 pm
by Glen M
aumeisters wrote:Glen M wrote:If your clutch hose would fit the 2l would you consider selling it?
Probably as I understand it doesn't fit my siii.
Thats the one I have but in clear.
Sent from my STV100-4 using Tapatalk
If it won't fit your siii it's unlikely it'll fit my tsiii.
Thanks anyway.
Re: RE: Re: Gen3 v6
Posted: Thu Mar 02, 2017 10:20 pm
by aumeisters
Glen M wrote:aumeisters wrote:Glen M wrote:If your clutch hose would fit the 2l would you consider selling it?
Probably as I understand it doesn't fit my siii.
Thats the one I have but in clear.
Sent from my STV100-4 using Tapatalk
If it won't fit your siii it's unlikely it'll fit my tsiii.
Thanks anyway.
No worries
Sent from my STV100-4 using Tapatalk
Re: Gen3 v6
Posted: Fri Mar 03, 2017 4:21 pm
by Lexo
it's a Nissan 350z hose you want, got one on mine
Re: Gen3 v6
Posted: Fri Mar 03, 2017 8:23 pm
by nissan300zx
i had the 350z hose on my gen 3 so should fit an siii ok.
Re: Gen3 v6
Posted: Fri Mar 03, 2017 8:31 pm
by aumeisters
So @Lexo does that mean that I can fit it to my siii?
Sent from my STV100-4 using Tapatalk
Re: Gen3 v6
Posted: Fri Mar 03, 2017 8:40 pm
by Shel
If it's the SS clutch hose your looking for Neil Cartlidge has some to suit the 2.0 which have the correct angled banjo connection. I think someone has put one on a V6 as well but you'd have to check with Neil.
Re: RE: Re: Gen3 v6
Posted: Fri Mar 03, 2017 8:42 pm
by aumeisters
Shel wrote:If it's the SS clutch hose your looking for Neil Cartlidge has some to suit the 2.0 which have the correct angled banjo connection. I think someone has put one on a V6 as well but you'd have to check with Neil.
IMAG0611.jpg
Mine on v6 was straight, no angle at banjo.
Sent from my STV100-4 using Tapatalk
Re: Gen3 v6
Posted: Fri Mar 03, 2017 8:50 pm
by GlasgowG
Re: Gen3 v6
Posted: Fri Mar 03, 2017 9:55 pm
by joebassman35
Shel wrote:If it's the SS clutch hose your looking for Neil Cartlidge has some to suit the 2.0 which have the correct angled banjo connection. I think someone has put one on a V6 as well but you'd have to check with Neil.
IMAG0611.jpg
Yes Neil sells them. I was a bit gutted that I found that out after I had already fitted mine on my V6. The 350z from eBay does fit but it's a bit long so had to bend round underneath the brake master cylinder
Re: Gen3 v6
Posted: Sat Mar 04, 2017 8:28 am
by aumeisters
Additions to parts
All 4 abs sensors, still in original packaging
Set of v6 alloys (needs refurb) with bad rubbers (pick up only)
Set of siii alloys with very good rubbers (very good condition, pick up only)
2 sets Front side mounts for bumper (metal bits which secures your bumper to front wings),
Set of gen3.5 rear lights
Sent from my STV100-4 using Tapatalk
Re: Gen3 v6
Posted: Sat Mar 04, 2017 8:29 am
by aumeisters
Wild spoiler gone
Sent from my STV100-4 using Tapatalk
Re: Gen3 v6
Posted: Fri Mar 17, 2017 5:09 pm
by aumeisters
Bump and is there anything anyone needs for cheap prices before I scrap it end of this week/beginning next week?
Re: Gen3 v6
Posted: Fri Mar 17, 2017 5:23 pm
by aumeisters
Btw all these are still available.
Speedo is white screen.
Re: Gen3 v6
Posted: Fri Mar 17, 2017 5:39 pm
by Lexo
Need to set a price for each part per forum rules.
Although you can still say after you'll accept offers if you want
Must say if I still had a Gen 3 / 3.5 I'd be all over that speedo
Re: Gen3 v6
Posted: Fri Mar 17, 2017 5:44 pm
by aumeisters
Lexo wrote:Need to set a price for each part per forum rules.
Although you can still say after you'll accept offers if you want
Must say if I still had a Gen 3 / 3.5 I'd be all over that speedo
Well as I am breaking it for only short period I am open to offers, not have clue on prices, plus it would be hard and loong to write price for totally all bits I still have :D
